Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Applying FAC-CMC for multi Tenant Environment

Hi all,

Design constraint!!!!

Lets say A CCM Cluster has separate partitions for each client,& FAC/CMC doesnt belong to any partition by design, so If FAC/CMC applied on any route pattern then it will be applied to whole cluster for outgoign calls.

Only work around is to create complete dial plan(route pattern) for each customer, but that route pattern will be assigned to that customer's partition only.. This will make the configuration tedious but functional

As configuring CMC/FAC @ Route Pattern(RP) level will not be practical in multi tenant design, so there is need in CCM design to provide CMC/FAC on either DN OR As a Service subscribe to device profile.

Above is the practical scenario m facing @ work.

Appreciate the community for elaboration.

5 REPLIES
Silver

Re: Applying FAC-CMC for multi Tenant Environment

Cisco Employee

Re: Applying FAC-CMC for multi Tenant Environment

if you feel that the product should have that capability get in touch with your AM and see the possibility of opening a PER for that

javalenc.

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Re: Applying FAC-CMC for multi Tenant Environment

Is there a way to raise suggenstions to Cisco R&D team

Cisco Employee

Re: Applying FAC-CMC for multi Tenant Environment

PER = Product Enhancement Request

talk to your AM in order to see if you can present one. Be aware that just the fact of presenting it does not mean it will be implemented in a future release

javalenc

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Community Member

Re: Applying FAC-CMC for multi Tenant Environment

page not found!!!!!!!!!!!!!!!

137
Views
0
Helpful
5
Replies
CreatePlease to create content