Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Approved servers for UCM 5.1

Does anybody knoww where I can get a compatability matrix for approved hardware when installing Cisco Unified Communications Manager 5.x and 6.0?

I have a feeling the server I have is too old.

Thank you

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: Approved servers for UCM 5.1

The following link has all the supported Servers for CM 4.x, 5.x and 6.x.

http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_brochure0900aecd8062a4f9.html

Only thing to keep in mind for the old servers listed is you need to have 2 GB RAM and 72 GB HDD as mentioned at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_1/rel_note/512cmrn.htm#wp39372

Hope this helps

1 REPLY
Gold

Re: Approved servers for UCM 5.1

The following link has all the supported Servers for CM 4.x, 5.x and 6.x.

http://www.cisco.com/en/US/products/hw/voiceapp/ps378/prod_brochure0900aecd8062a4f9.html

Only thing to keep in mind for the old servers listed is you need to have 2 GB RAM and 72 GB HDD as mentioned at http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_1/rel_note/512cmrn.htm#wp39372

Hope this helps

99
Views
0
Helpful
1
Replies
CreatePlease to create content