Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ARQ requests wrong bw to GK on CCME Gateway

I have the following topology:

Phone A - CUCM - GK - CCME - Phone B

The region and dial-peer on CallManagers are configured to use G.729 codec.

When Phone B attempts call to Phone A the CCME sends ARQ requesting 128 kbps which is wrong.

My question is how we can change the CCME to request the right bandwidth. The RAS dial-peer is configured to use G.729r8.

Thanks in advance.

2 REPLIES
Hall of Fame Super Gold

Re: ARQ requests wrong bw to GK on CCME Gateway

Recommend you engage Cisco TAC on the issue.

New Member

Re: ARQ requests wrong bw to GK on CCME Gateway

Good advice. Sound like bug because I went through all IOS possibilities to correct that. Unfortunatelly I can't open TAC as soon as this case is related only to lab issue.

174
Views
0
Helpful
2
Replies