Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AS5300, E1 pri, no clock source internal

Hi NetPro

I have problem with a AS5300 and E1 pri interface, the AS5300 have 4 E1 pri contected and working but i need attach a another E1, but when i try to configure the clock source internal, the command it's no avalaible.

regards

fixie rider
5 REPLIES
Hall of Fame Super Gold

Re: AS5300, E1 pri, no clock source internal

Can you post "show controllers e1" and a console log of the clock options presented for the 5th controller.

New Member

Re: AS5300, E1 pri, no clock source internal

thanks, I send a document.

fixie rider
Hall of Fame Super Gold

Re: AS5300, E1 pri, no clock source internal

Can you try configuring clock source line primary for the interface connected to master clock ?

And the console log unsuccesful configuration for a controller you want to use clock internal.

New Member

Re: AS5300, E1 pri, no clock source internal

is not posible configure the clock

fixie rider
Hall of Fame Super Gold

Re: AS5300, E1 pri, no clock source internal

You should have mentioned that is a 5350, not 5300.

You need to configure you primary clock source first (dial-tdm-clock):

http://www.cisco.com/en/US/docs/routers/access/as5350xm/software/configuration/guide/54bas2.html#wp1055650

409
Views
0
Helpful
5
Replies