Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

AS5400 as Voicegateway

Hi Experts,

I have one Cisco AS5400 with E1 and PVDMII-64 modules on it. I want to add this AS54 as a voice gateway in Call manager 8.5, is it possible? how? Is there any guide? or steps?

Thank you for your help.

Br

Amir

  • IP Telephony
2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Super Bronze

AS5400 as Voicegateway

This document shows you how to add h323 gateway in cucm.

https://supportforums.cisco.com/docs/DOC-24318

Once you have added the gateway to cucm, you then need to configure your gateway as follows:

1. configure the interface that will be used for h323 signalling..

interface

h323-gateway voip interface

h323-gateway voip bind srcaddr X.X.X.X

2. Configure your dial-peers.

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
6 REPLIES
VIP Super Bronze

AS5400 as Voicegateway

Amir,

I believe you can add this as a h323 gateway in cucm or create a sip trunk to the gateway in cucm.

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
VIP Purple

AS5400 as Voicegateway

Hi Amir,

please refer the datasheet which says it can be configured for H.323, MGCP and SIP.

http://www.cisco.com/en/US/products/hw/univgate/ps505/products_data_sheet09186a0080091e51.html

Could not find any DOC but I think config would be somewhat similat to other ISR /ISRG2 routers

regds,

aman

New Member

AS5400 as Voicegateway

Hi,

Thank you for your comments, I was looking for a guide to show me how to configure step by step. actually I don't have time to look after commands.

Br

Amir

VIP Super Bronze

AS5400 as Voicegateway

This document shows you how to add h323 gateway in cucm.

https://supportforums.cisco.com/docs/DOC-24318

Once you have added the gateway to cucm, you then need to configure your gateway as follows:

1. configure the interface that will be used for h323 signalling..

interface

h323-gateway voip interface

h323-gateway voip bind srcaddr X.X.X.X

2. Configure your dial-peers.

Please rate all useful posts

"opportunity is a haughty goddess who waste no time with those who are unprepared"

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
New Member

AS5400 as Voicegateway

Hi,

Finally fixed it. That was perfect document.

Many thanks to Amanso and Aokalawon.

Br

Amir

144
Views
8
Helpful
6
Replies
This widget could not be displayed.