I’m setting up a new location that will register to my CUCM 7+ cluster. It’s very small, 7 phones, 2 or 3 overhead speakers. I’m looking for a paging option that fits a site this small. There is no existing paging infrastructure in place. I will need to choose either analog or IP paging speakers. Paging over the phones in addition to the speakers is a nice-to-have, but not required.
So far it seems the economical choice would be to buy an analog paging system, and use an analog port on the router. I have done this several times, but if I’m buying everything new, I would rather go with IP speakers. The problem with that is I would have to have 3rd party software to make them all work in the same paging zone, and I have yet to find an option that is priced for an office this size. I like SA-Announce by Syn-Apps, but they have minimum 50-seat licenses.
Does anyone see an option I’m missing? Or know a solution that’s coming soon?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...