03-17-2009 08:17 AM - edited 03-15-2019 04:54 PM
Dears, is there anyway that i can use on callManager 4.3 to assign a private line to a specific extension so that extension only can dial outside numbers through this line?
There is any similar way to configure it on cme by associating a directory number with a foreign exchange office (FXO) port. Is there any similar way to configure it on callmanager 4.3?
Solved! Go to Solution.
03-17-2009 08:49 AM
no, you can create a route pattern and bind it to the FXO. but there is no real equivalent of 1 button - 1 fxo
on FXO config attendant DN to that line
HTH
java
if this helps, please rate
03-17-2009 08:21 AM
very simple, use a CSS that only reaches route patterns to PSTN
if you don't want anyone calling the line create a special partition and do not add it to any CSS
HTH
java
if this helps, please rate
03-17-2009 08:44 AM
there is no config similar to the trunk that is configured on cme that associates the dn with the fxo port?
03-17-2009 08:49 AM
no, you can create a route pattern and bind it to the FXO. but there is no real equivalent of 1 button - 1 fxo
on FXO config attendant DN to that line
HTH
java
if this helps, please rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide