Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

assign a private line to n IP phone

Dears, is there anyway that i can use on callManager 4.3 to assign a private line to a specific extension so that extension only can dial outside numbers through this line?

There is any similar way to configure it on cme by associating a directory number with a foreign exchange office (FXO) port. Is there any similar way to configure it on callmanager 4.3?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: assign a private line to n IP phone

no, you can create a route pattern and bind it to the FXO. but there is no real equivalent of 1 button - 1 fxo

on FXO config attendant DN to that line

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
3 REPLIES
Cisco Employee

Re: assign a private line to n IP phone

very simple, use a CSS that only reaches route patterns to PSTN

if you don't want anyone calling the line create a special partition and do not add it to any CSS

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: assign a private line to n IP phone

there is no config similar to the trunk that is configured on cme that associates the dn with the fxo port?

Cisco Employee

Re: assign a private line to n IP phone

no, you can create a route pattern and bind it to the FXO. but there is no real equivalent of 1 button - 1 fxo

on FXO config attendant DN to that line

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
286
Views
0
Helpful
3
Replies