Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ATA 186 MGCP Fax Pass Through

Anyone have luck configuring fax pass-through using a MGCP GW with a ATA186. I tried T38 mode, but I understand that is not supported under MGCP. I can get the fax to answer, but not connect. thanks

1 REPLY
Cisco Employee

Re: ATA 186 MGCP Fax Pass Through

Try these settings, Millward.

For ATA:

http://cisco.com/en/US/partner/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/sccpaapd.html

Recommended values for the following two settings:

Audiomode:0x00150015

connectmode:0x90000400

For the MGCP Gateway:

http://www.cisco.com/en/US/docs/ios/12_4t/voice/cisco_ios_fax_and_modem_services_over_ip_application_guide/faxpt.html#wp1162097

Regards,

Michael.

299
Views
0
Helpful
1
Replies
CreatePlease login to create content