I have a strange problem that has left me scratching my head. I have a small remote office that uses an ATA 186 for a fax machine and an analog cordless phone. About a month ago the cordless phone stopped working or so we thought. When you attempt to make a call, you received dial tone, dial the number, one ring and immediately receive a fast busy. Inbound also do not work to the analog phone. If I swap the fax machine line with the cordless line, the problem follows the cordless phone. Nothing has changed in the configuation of the line or the ATA. We have replaced the cordless phone, the phone cable and the ATA - all to no avail. Any ideas or pointers?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...