Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ATA different ringing tone for internal calls

We have a need to change the ringing tone of an ATA depending whether the call is from an external phone (DID) or an internal extension. It is connected to a night bell and they want to identify the call as internal or external.

We are using Call Manager 4.2.3

Thanks

Scott

2 REPLIES
New Member

Re: ATA different ringing tone for internal calls

Hi,

The ATA provides only the ringing voltage/interval for the analog phone/device.

A workaround could be, get a second night bell connected on the second ATA interface.

The external, incoming DID must be translated to a second, different internal number (second interface on the ATA).

ATA interface 1 => night bell 1 (internal)

ATA interface 2 => night bell 2 (external)

Only an idea ;-)

Greets

Norbert

New Member

Re: ATA different ringing tone for internal calls

Thanks for your suggestion.

I was hoping that we did not have to go down that track, but maybe we do.

Cheers

Scott

110
Views
0
Helpful
2
Replies
CreatePlease login to create content