ATA Fax

[Steellllllllll0]

Hi Guys,

I am having the exact same problem as posting http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&topicID=.ee6c829&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cc12f69 with the execption i am using 3 bri`s instead of an E1. I have checked all the ATA and gateway settings to match that in the above posting. This has not made any difference tho for me.For the network clock select command i have used BRI 0/1/1 ....i am using H.323....

Any ideas ??

[Zin.Karzazi]

What happen when you call the DN number of your fax machine? post your Router config here. Check also if your ATAs are in the right Device pool, CSS/Partition. There is also a tool called "preserv.exe" which can help you troubleshoot your ATA( see here for more infos:

http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800d698e.shtml)

[Steellllllllll0]

Hi Guys,

I still have this issue ongoing. Any help would be appreciated. Please see some of my debugs in the attachment :