I have an IP phone and ATA that share the same DN (shared line appearance - SLA). Do you know if SLA can be supported in SRST mode as well?
I have CM 4.2 and SRST 3.3 on Cisco 2821.
ATA is running SCCP image.
When we fail the router into SRST mode both, the phone and the ATA, register but the ATA gets a bogus DN and doesn't even provide dial tone to the analog phone. The ATA is listed as registered on the SRST router but is not functional.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...