Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ATA:Not able send/receive fax(IP Fax)

Hi,

Running CCM 4.1

Central location and branch location connected through WAN link.We are registered ATA at both location to the same CCM. We can able to make a voice call between these two ATA's,but not able send the fax.When we try to send the fax,fax machine displys "communication error".

Help me out!!!

Regards,

1 REPLY
Silver

Re: ATA:Not able send/receive fax(IP Fax)

Set the clocking on the GW:

Please add this command to the GW config in global config mode:

network-clock-select 1 e1 0/0/0

Set the ATA for fax:

Please set these settings on the ATA box:

Audio mode: 0x00150015

Connect mode: 0x90000400

Configuring and Troubleshooting the Cisco ATA 186 with Fax:

http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_configuration_example09186a00800d698e.shtml

214
Views
0
Helpful
1
Replies