08-18-2009 10:27 AM - edited 03-18-2019 10:31 AM
The ATA 186 is not allowing the second port to allow external calling only the first port. Any ideas I saw some information about codec when using a h323 gateway
08-18-2009 11:00 AM
Have you enabled the 2nd port thru the web interface? The parameter is UID1, set it to 1 to enable.
08-18-2009 12:18 PM
Yes this was set, I can make calls internally but can't call out
08-18-2009 01:11 PM
Hi Rohini,
The second port of an ATA can only use g.711 maybe this is the issue.
Hope this helps!
Rob
10-06-2009 04:54 PM
Anyone figure this out, I'm having the exact same problem.
10-06-2009 05:03 PM
Just discovered I was using G729 so that might be my issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide