Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ATA UNREGISTER_ABNORMAL

I have an ATA 186 I am trying to register to a CME through a DMVPN. When I put the ATA on the local network with the CME, it registers without issue. If I put the ATA at the remote location, it unregisters abnormally.

3825 IOS 12.4(25a) SPESERVICESK9-M.

CME 3.3

Debug scrolls the following:

Jun 16 19:30:33.368: %IPPHONE-6-REG_ALARM: Name=ATA001906012507 Load=ATA030204SCCP090202A.zup Last=Initialized

Jun 16 19:30:33.368: %IPPHONE-6-REG_ALARM: Name=ATA190601250701 Load=ATA030204SCCP090202A.zup Last=Initialized

Jun 16 19:30:33.368: %IPPHONE-6-REGISTER: ephone-2:ATA001906012507 IP:10.65.65.21 Socket:3 DeviceType:Phone has registered.

Jun 16 19:30:33.368: %IPPHONE-6-REGISTER: ephone-3:ATA190601250701 IP:10.65.65.21 Socket:2 DeviceType:Phone has registered.

Jun 16 19:30:34.884:

socket [3] send ERROR 11 msg=0x109

Sleep 250 msec for ephone-(2) on socket [3]Skinny Socket [3] retry failure errno=11

Jun 16 19:30:35.136: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-2:ATA001906012507 IP:10.65.65.21 Socket:3 DeviceType:Phone has unregistered abnormally.

1 REPLY
Green

Re: ATA UNREGISTER_ABNORMAL

Make sure ATA is running latest load.

check with VPN guys....u have already isolate it to turn on inspection for sccp.

350
Views
0
Helpful
1
Replies