10-18-2007 07:28 AM - edited 03-15-2019 12:02 AM
Hi,
when i try to access the HTTP administration pages of the device (ex. http://10.10.10.10/dev or http://10.10.10.10/AudioCfg), the ATA automatically resets.
I'm using CallManager 4.2(3)sr2b and ATA186 with SCCP firmware ATA030203SCCP051201A.
Everything else is ok (i can make calls or fax from ATA using both ports, i can ping the device using CCM and my laptop).
Thank you in advance for the help.
Solved! Go to Solution.
11-08-2007 06:04 PM
I noticed something similar when access the device via its web interface through a pix/asa where the MSS window was exceeded and the packet was dropped. Don't know if it applies to your scenario but thought I would at least mention it.
11-08-2007 06:04 PM
I noticed something similar when access the device via its web interface through a pix/asa where the MSS window was exceeded and the packet was dropped. Don't know if it applies to your scenario but thought I would at least mention it.
11-08-2007 11:25 PM
This is a hallmark example of severe SW defect. Have you checked Cisco bugtool kit or considered updating the code on the ATA - perhaps 4.5 ?
Personally I would upgrade the SW.
hth,
Ajaz
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: