Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ATA186

the ata is connected to a CME. the analog phone connected to this ata does recieve calls, but it can't make calls (no dial tones..).

Do i need to work on the ATA configuration or the CME? and how?

4 REPLIES
New Member

Re: ATA186

Hi

You have to register the ATA (if it's not auto reg)then assign it, css, part, dir number

/ama

Hall of Fame Super Gold

Re: ATA186

Which image are you using on the ATA ?

New Member

Re: ATA186

what do u mean by image?

Let's tell u what i did:

I did all the configuration needed for an ATA in the IP-PBX (Cisco 2821).

It seems that the ATA and the CME are talking. When i make a call from any IP phone to the ATA, it works-you hear the analog phone ringing, but i'm not able to make a call from the analog phone that is connected to the ATA.. Any help?

New Member

Re: ATA186

Is your Cisco ATA 186

running SIP or SCCP firmware?

423
Views
0
Helpful
4
Replies