Attendant Console and CUCM 9.1.2

[Anatoly Fanrus]

Hello,

I performed migration from CUCM 7.1 to CUCM 9.1 and now i cannot connect to server from attendant console - unable connect to server.

I know that Attendant Console is not supported on 7.1 but it worked.  

Will CallManager Attendant Console work on CUCM 9.1.2 after migration from 7.1 ?                  

[Roger Kallberg]

No, support for Cisco AC is completely removed in 8.x and above.

Sent from Cisco Technical Support iPhone App

[Anatoly Fanrus]

Thank you, do you know maybe there is replacement for this tool. Our customer want to control thier phones from computers.

Is it possible to completly control Desktop IP Phone from cisco jabber like  from attendant console?

Thanks in advance,

with best regards

[Roger Kallberg]

If you only want phone control you can do that with Jabber.

Sent from Cisco Technical Support iPhone App

[Jaime Valencia]

You can also look into the CUxAC products

Sent from Cisco Technical Support iPad App

[Roger Kallberg]

Also ANDTek has a good variant of a AC, but as stated before if you only want desk phone control you can use Jabber.

Sent from Cisco Technical Support iPhone App