11-22-2013 01:00 PM - edited 03-16-2019 08:32 PM
Hello,
I performed migration from CUCM 7.1 to CUCM 9.1 and now i cannot connect to server from attendant console - unable connect to server.
I know that Attendant Console is not supported on 7.1 but it worked.
Will CallManager Attendant Console work on CUCM 9.1.2 after migration from 7.1 ?
11-22-2013 01:23 PM
No, support for Cisco AC is completely removed in 8.x and above.
Sent from Cisco Technical Support iPhone App
11-23-2013 01:41 AM
Thank you, do you know maybe there is replacement for this tool. Our customer want to control thier phones from computers.
Is it possible to completly control Desktop IP Phone from cisco jabber like from attendant console?
Thanks in advance,
with best regards
11-23-2013 11:02 AM
If you only want phone control you can do that with Jabber.
Sent from Cisco Technical Support iPhone App
11-23-2013 11:05 AM
You can also look into the CUxAC products
Sent from Cisco Technical Support iPad App
11-23-2013 11:13 AM
Also ANDTek has a good variant of a AC, but as stated before if you only want desk phone control you can use Jabber.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide