Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Attendant Console and CUCM 9.1.2

Hello,

I performed migration from CUCM 7.1 to CUCM 9.1 and now i cannot connect to server from attendant console - unable connect to server.

I know that Attendant Console is not supported on 7.1 but it worked.  

Will CallManager Attendant Console work on CUCM 9.1.2 after migration from 7.1 ?                  

5 REPLIES

Re: Attendant Console and CUCM 9.1.2

No, support for Cisco AC is completely removed in 8.x and above.

Sent from Cisco Technical Support iPhone App

Please remember to rate helpful responses and identify helpful or correct answers.
Community Member

Re: Attendant Console and CUCM 9.1.2

Thank you, do you know maybe there is replacement for this tool. Our customer want to control thier phones from computers.

Is it possible to completly control Desktop IP Phone from cisco jabber like  from attendant console?

Thanks in advance,

with best regards

Re: Attendant Console and CUCM 9.1.2

If you only want phone control you can do that with Jabber.

Sent from Cisco Technical Support iPhone App

Please remember to rate helpful responses and identify helpful or correct answers.
Cisco Employee

Re: Attendant Console and CUCM 9.1.2

You can also look into the CUxAC products

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: Attendant Console and CUCM 9.1.2

Also ANDTek has a good variant of a AC, but as stated before if you only want desk phone control you can use Jabber.

Sent from Cisco Technical Support iPhone App

Please remember to rate helpful responses and identify helpful or correct answers.
390
Views
5
Helpful
5
Replies
CreatePlease to create content