Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Attendant Console/Busy

Hi -

If I have an Attendant Console and the first person is a receptionist... I would like her to only get three calls before considered "busy", not four before rolling to the next. Apparently, changing the line settings do not help. Please advise. Thanks!

2 REPLIES
Silver

Re: Attendant Console/Busy

To enable call queuing in the Attendant Console, configure three parameters in the Attendant Console configuration tool. Perform these steps:

Open the acconfig.bat file located in the C:\Program Files\Cisco\CallManagerAttendant\bin directory on the Cisco CallManager Attendant Console server.

Select the Advanced Tab.

Check the Enable Queuing box.

Specify the Queue Size.

Specify the Hold Time (in Seconds).

http://www.cisco.com/en/US/products/ps7282/products_qanda_item09186a00800b0a20.shtml

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_0_1/ccmsys/a07ccmac.html

New Member

Re: Attendant Console/Busy

Got it. Thanks!

198
Views
0
Helpful
2
Replies
CreatePlease to create content