Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Attendant Console ->CCM7.1 Several Problems

Hello

After migrating a customer from callmanager 4.2 to 7.1, we have reinstalled the new cisco attendant console (AC7.1.0_c)from the plugging page.

Then we have reconfigured everything and it seems to work properly except that we have the following problems :

On main office  we have a Pilot Point and 2 receptionists (each one has an AC which is linked to an ipphone )

=> If we set the broadcast mode with queuing then : ipphone is not ringing anymore, receptionist can only see the incoming call on the "AC broadcast call"

=> if we set circular mode , phone is ringing BUT only one call is seen on the "call control" and the other incoming call receives a busy tone...

What we would like is to see all the incoming calls in the AC

ps: all the AC , services.. have already been rebooted

Fred

148
Views
0
Helpful
0
Replies