02-20-2008 02:51 AM - edited 03-15-2019 08:57 AM
Hi,
Does anyone have the complete dial plan necessary to implement into a CCME for West Australia ?
best regards
Olivier
02-20-2008 03:01 AM
Hi, usually CCME doesn't require a very complete dialplan. I haven't checked Australia, but if numbers there are of fixed length, configure DP so that there is no T in destinaion-pattern, just as many dots as necessary. That is the first and most important improvement you can do.
02-20-2008 05:03 AM
This tech note summarises the AU dial plan - you might need to change the local 8 digit numbering depending on the location of the gateway router -
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800945b9.shtml
Otherwise use a destination pattern of '0.T' :-)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: