Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

Austria dialplan

Hi All,

Would appreciate some help with an issue I'm having with a new site.

Customer would like all calls that go to their main number 004355502xxxx to divert to the main reception. When I dial this number and run a debug isdn q931 I get no called number:

*Oct 18 14:51:31.828: ISDN Se0/0/0:15 Q931: TX -> ALERTING pd = 8 callref = 0x908D

Progress Ind i = 0x8088 - In-band info or appropriate now available

*Oct 18 14:51:32.688: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x108E

Sending Complete

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98394

Exclusive, Channel 20

Progress Ind i = 0x8283 - Origination address is non-ISDN

Calling Party Number i = 0x1180, '441825xxxxxx'

Plan:ISDN, Type:International

Calling Party Number i = 0x1183, '441825xxxxxx'

Plan:ISDN, Type:International

*Oct 18 14:51:32.780: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x908E

Cause i = 0x8081 - Unallocated/unassigned number

*Oct 18 14:52:01.932: ISDN Se0/0/0:15 Q931: TX -> CONNECT pd = 8 callref = 0x908D.

I've tried using a blank translation with a called party number mask of 500.

Any thoughts?

1 REPLY
Hall of Fame Super Gold

Re: Austria dialplan

Hi,

Which IOS is this? How did you set up the forward?

142
Views
0
Helpful
1
Replies