Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Auto answer with FXO or FXS port

I have a paging system that used to connect to an analogue port on a PBX.  The analogue port was configured for auto answer.  When you called the port extension from any phone you could make announcements over the paging system.  We have now implemented Cisco IPT and I need to recreate this capability.  I need to be able to configure either an FXS or FXO to auto answer when this extension is called.

3 REPLIES
Hall of Fame Super Gold

Auto answer with FXO or FXS port

Maybe start which system and version are you using, which gateway and which protocols are you using.

New Member

Auto answer with FXO or FXS port

We are running CUCM 6.1.2, the gateway is configured to use H323 and is a  3925 running c3900-universalk9-mz.SPA.151-4.M1.bin

Auto answer with FXO or FXS port

Hi Michael,

for auto-answer use command "connection plar"

1227
Views
0
Helpful
3
Replies
CreatePlease login to create content