Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Auto Registration CUCM 6

Hi.

I have a CUCM version 6, and I have problem with the auto registration of the phones. The phone are not registered in the CUCM. I check this parameters:

Cisco Unified CM Configuration:

Auto-REgistration Information:

Starting Directory Number: 5000

Endind Directory Number: 5100

Partition : None

Uncheck the option "Auto - Registration Dissabled on this Cisco Unified Communication -Manager"

Cisco Unified Communications Manager GRoup Information:

Check the option: Auto-registration Cisco Unified Comunication Manager Cisco.

I need set other parameters to work the auto register option in my phones or restart any service??

5 REPLIES
Cisco Employee

Re: Auto Registration CUCM 6

Where are the phones pointing to for the TFTP?

If you set them to look into that server where auto-registration is enabled does it work?

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Auto Registration CUCM 6

Yes with DHCP configuration or IP Static Configuration the phone are registered. But this message is showed: "Registration Rejected : Error DBConfig" (The phone is not auto registered).

Cisco Employee

Re: Auto Registration CUCM 6

are there enough DLUs for the phones?

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Auto Registration CUCM 6

Yes, there are DLU available.

New Member
633
Views
2
Helpful
5
Replies
CreatePlease to create content