Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Auto Ring Feature Possible?

I have a phone, that when the hand set is picked up, I want to automatically dial an extension. This phone will only be used to dial this extension when the hand set is picked up. We are running Call Manager 6.1. Is this possible, and if so, how does one set this up?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: Auto Ring Feature Possible?

Hi Adam,

Just to add a note to the great tips from Nick (+5 points Nick :)

There is a great step by step here;

Hotdial on IP Phones with CallManager Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml#intro

Hope this helps!

Rob

2 REPLIES

Re: Auto Ring Feature Possible?

What you do is create a CSS that contains a single translation pattern that translates 0 digits into the number you want to dial.

Here are the specific steps:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_3/cucm-rel_note-613.html#wp472214

hth,

nick

Hall of Fame Super Red

Re: Auto Ring Feature Possible?

Hi Adam,

Just to add a note to the great tips from Nick (+5 points Nick :)

There is a great step by step here;

Hotdial on IP Phones with CallManager Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml#intro

Hope this helps!

Rob

104
Views
15
Helpful
2
Replies
CreatePlease to create content