Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

automatically changing the trunk

hi friends,

i am having 2851 ccme and i am having 7 analog lines and one 30 channel PRI line

what i need is once the analog lines are used (full ) then automatically system has to select pri line to call outside

and i am using 9 to dial out.

i attaching my config in this

in my config there is two access one is 9(for analog line ) and 0 (for pri line)  and some direct numbers are there in PRI line.

thanks

cyril

2 REPLIES
VIP Super Bronze

Re: automatically changing the trunk

You can use a trunk group with preference labels to create an ordered list of interfaces to use for the outbound calls. Each of the analog voice ports would be 1-9 and the PRI would be preference 10.

http://www.cisco.com/en/US/docs/ios/voice/command/reference/vr_t3.html#wp1622528

Please remember to rate helpful responses and identify helpful or
New Member

Re: automatically changing the trunk

hi jonathan,

can you explain me with my config it is very helpful to me becuse i tried it , but i am getting confused.

thanks

cyril

132
Views
0
Helpful
2
Replies