I am running CCM 4.2(3) and having around 200 phones need to configure with callmanager. Most of the user will use extension mobility and would login anywhere in office. For this we don't want to map any specific extension with physical phone. All extension will be assigned to device profile. Tell me can be configure AutoRegistration in this way that no directory number assign to phone just it register automatically so that i just configure users and their profile and not phones.
Or tell me best way to add phones without dn and without configuring mac address manually.
Also tell me can i subscribe extension mobility service to phones using BAT.
You can enable auto registration on ccm server. For the server not to assign DN, just make sure that the range of extension in the DN range is eg 1. EG 2000 2001. This way you can enable auto registration and have numbers not assigned to phones except the first phones.
Yes You can use BAT to subscribe phones for Extension Mobility...I am sure of this with CCM6.X, I am not sure with 4.2.
Please rate all useful posts
"The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...