Avaya Voice mail integration with Unified Communications manager 6.1
I need to integrate an Avaya Voicemail system with Unified Communications Manager 6.1. I have connected the Avaya PBX to the CCM using the 2811 over a PRI QSIG trunk. The Cisco IP phones will be registered to the CCM and the VM boxes for these phones will reside on the Avaya Voicemail system. I am looking for some help how to proceed doing the VM integration. I already have the QSIG trunk up and looking for how to proceed further? Appreciate your help
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...