Hi, I have installed a b-acd that works ok. But the only thing that I can not manage is the go off time or hook time of b-acd. I mean, when my company receives a call the first greeting time ("en_bacd_welcome.au")is heared after 4 ring tones.
How can I get the greeting time could be heard after 0 or 1 ring tone?
First of all, it seems the call is originated from an ephone in the same router, and the FXO line is a/b line from a an NT1 that also has BRI link to the router. Is this correct ? Yes. I am doing a call from ISDN line to FXO port(b-acd) in the same router
Then, ringing start a 16m 58.5 s. Call is connected at 17m 05.7s. 7 seconds do not look enough time for 4 rings? I do it again and since I hear the first tone time until b-acd hooks take 10 secons moreless
Also I see that caller id throws an error, Is caller id working (displayed on phones) ? Caller id is not displayed in "ephone-dn".
Finally it seems that the call is terminated
by supervisory disconnection. Was the call palced to B-ACD? Did you disconnected by hangup the ephone ?Yes, the b-acd take place and after I hang up.
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...