Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Bacd - no welcome prompt in internal calls

My bacd issue

Attached is my config. I get fast busy tone and Unknown number on display when I dial the pilot number from any CME phone. I can dial hunt-pilot directly and call get routed correctly or give the aa-pilot to hunt-pilot and ring the phones fine. Call in between phones are setup using G711ulaw. I've tried single voip dial-peer with incoming called-address and destination-pattern, reload of router, re-configure script.

Below is the snapshot of bacd config and debug voice application seesion..

application

service queue flash:app-b-acd-2.1.0.0.tcl

param queue-len 15

param aa-hunt5 3701

param queue-manager-debugs 1

param number-of-hunt-grps 2

!

service aa flash:app-b-acd-aa-2.1.0.0.tcl

paramspace english index 1

param number-of-hunt-grps 2

param menu-timeout 6

param handoff-string aa

param dial-by-extension-option 4

paramspace english language en

param max-time-vm-retry 2

param max-extension-length 4

param aa-pilot 3700

paramspace english location flash:

param second-greeting-time 30

param welcome-prompt _bacd_welcome.au

param queue-manager-debugs 1

param call-retry-timer 15

param max-time-call-retry 600

param voice-mail 3005

paramspace english prefix en

param service-name queue

!

!

!

BR2#dir flash:

Directory of flash:/

1 -rw- 24679 <no date> app-b-acd-2.1.0.0.tcl

2 -rw- 33870 <no date> app-b-acd-aa-2.1.0.0.tcl

3 -rw- 75650 <no date> en_bacd_allagentsbusy.au

4 -rw- 83291 <no date> en_bacd_disconnect.au

5 -rw- 63055 <no date> en_bacd_enter_dest.au

6 -rw- 37952 <no date> en_bacd_invalidoption.au

7 -rw- 496521 <no date> en_bacd_music_on_hold.au

8 -rw- 123446 <no date> en_bacd_options_menu.au

9 -rw- 42978 <no date> en_bacd_welcome.au

10 -rw- 496521 Mar 01 2002 01:13:09 +00:01 music-on-hold_3db.au

11 -rw- 496521 Mar 01 2002 02:47:07 +00:01 music-on-hold.au

536870908 bytes total (534895700 bytes free)

BR2#

BR2#

There is no output when I do debug voice application script

OUTPUT OF "debug voice application session" is as below.

Calling no: 3002, called no: 3700

BR2#debug voice application sess

voip application session debugging is on

BR2#

Mar 1 03:17:40: //37//AFW_:/Closing_AnyEvent:

Mar 1 03:17:40: //37//AFW_:/Session_Cleaner:

Mar 1 03:17:40: //-1//AFW_:/C_ServiceSession_Event_Handler:

Mar 1 03:17:40: //37/8A066DCF802F/AFW_:/C_ServiceSession_Event_Handler: Received event CC_EV_CALL_DISCONNECT_DONE[17] in Main Loop

Mar 1 03:17:40: //37//AFW_:/AFW_M_Session_Terminate:

Mar 1 03:17:40: //-1//AFW_:HN000FF5F4:/AFW_M_Session_Free: MOD[Session_65BFE164_0_1046004] ( )

Mar 1 03:17:42: //-1//AFW_:/C_ServiceSession_Event_Handler:

Mar 1 03:17:42: //-1//AFW_:/AFW_Session_New:

Mar 1 03:17:42: //40//AFW_:/C_PackageSession_NewCall: Session module listened by TclModule_65BE268C_0_1066356

Mar 1 03:17:42: //40//AFW_:/Open_SetupIndication: Calling #(3002), Called #(), peer_tag(20002)

Mar 1 03:17:44: //40//AFW_:/GettingDest_DigitCollectDone: status(4) discCause(0) ovrlp(TRUE)

Mar 1 03:17:44: //-1//AFW_:/C_PackageSession_GetSigPeer:

Mar 1 03:17:44: //40//AFW_:/ContactingDest_SetupDone:

Mar 1 03:17:44: //40//AFW_:/Session_Close: lastFailureCause 34

Mar 1 03:17:44: //40//AFW_:/AFW_M_Session_Terminate:

Mar 1 03:17:44: //40//AFW_:/AFW_M_Session_Terminate: lastFailureCause 34

Mar 1 03:17:44: //40//AFW_:/Session_Cleaner:

Mar 1 03:17:47: //40//AFW_:/Closing_AnyEvent:

Mar 1 03:17:47: //40//AFW_:/Session_Cleaner:

Mar 1 03:17:47: //-1//AFW_:/C_ServiceSession_Event_Handler:

Mar 1 03:17:47: //40/96270EF58032/AFW_:/C_ServiceSession_Event_Handler: Received event CC_EV_CALL_DISCONNECT_DONE[17] in Main Loop

Any help is very welcome.

3 REPLIES
New Member

Re: Bacd - no welcome prompt in internal calls

I've got exactly the same problem. The same b-acd script won't answer my calls. Any assistance will be appreciated.

New Member

Re: Bacd - no welcome prompt in internal calls

Hi,

this is a normal issue:

Probably you attached the "service aa" to a pots dial-peer for incoming pstn call.

you have to do a Voip dial-peer (loopback dial-peer) for the internal ip phone with "service aa" applied. Here an example:

dial-peer voice 8000 voip

description "Voip loopback dial-peer "

service aa

destination-pattern 8000 (for example)

session target ipv4:"ip address cme"

incoming called-number 8000 (for example)

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

Please rate if helpful.

Diego

New Member

Re: Bacd - no welcome prompt in internal calls

HI,

My issue was the bandwidth limitation at GK. My CME was registered to a GK and any call on VOIP DP would go to GK for b/w confirmation. I had set b/w for 1 G.729 call, increasing it to G.711 call made my script work.

Thanks,

inner_silence

561
Views
0
Helpful
3
Replies