I want to turn OFF the backlight display in Cisco IP phone 7970 after one minute once the user uses the phone. I am using Call Manager Express 7.0. I have applied the following commands inside the telephony services.
service phone displayIdleTimeout 00:01 service phone backlightIdleTimeout 00:01
Still the phones are not at all turning OFF after one minute. When I checked in the device configuration over the phone, it shows as displayOnTime as 7.00, displayOnDuration as 10.00 and displayIdleTimeout 00:001. I have even tried to remove displayOnTime and displayOnDuration by applyin as no displayOnTime and no displayOnDuration. But its still showing the same.
I have tried the cisco recommended solution as:
Router(config)# telephony-service Router(config-telephony)# service phone daysBacklightNotActive 1,2,3,4,5,6,7 Router(config-telephony)# service phone backlightOnTime 07:30 Router(config-telephony)# service phone backlightOnDuration 10:00 Router(config-telephony)# service phone backlightIdleTimeout 00.01 Router(config-telephony)# create cnf-files Router(config-telephony)# reset all
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4