I have formed a SFTP server to backup the configurations of the Cisco Call Manager Version 6, and have formed a name of user and password for the Call manager. In the Call manager I have formed the following thing:
Disaster Recovery System / Backup / Backup Device / Add New
I select: Network Directory
Server name: IP Address New SFTP Server
Path name: /
Username: the username configured in the SFTP Server
Password : the password configured in the SFTP Server
With this information this messages is showed:
Update failed : Unable to access SFTP server. Please make sure the login credentials and path are correct.
I have tried from a SFTP Client PC to verify the credentials and the computer connects without problems.
The SFTP server is configured with the port number 22.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.