Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Bad port identification on Cisco VG224

Hello Folks,

Good Day!

I have a cisco vg224 device, when i execute the below it says.

resgw003-vg224#sh voice port summary
                                           IN       OUT
PORT            CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
=============== == ============ ===== ==== ======== ======== ==
2/0             --  fxs-ls      up    dorm off-hook  idle     y 

In CUCM the status remains registered, how to i confirm is something wrong with this port. is there any way me to perform the loop test.

If so please let me know the procedure and commands.

Thanks.

      

1 REPLY

Bad port identification on Cisco VG224

The only thing "wrong" with the port, is that it's off-hook. The only way to fix that is to put the receiver back down on the phone. (Or, if you're sure the end device is on hook, reboot the VG224)

GTG

Please rate all helpful posts.
136
Views
0
Helpful
1
Replies
CreatePlease to create content