Bandwith Utilization for Voice

[Mubarak ali Ali]

How can we check ,Voice Bandwith Utilization in Cisco Call Manager .is there is any tool for that

[Robert Thomas · Accepted solution]

You can use Locations to have CallManager track down the amount of Bandwidth used. Then you can use RTMT Perfomance counters to display the amount of bandwidth available on Real Time.

[Mubarak ali Ali]

Dear Robert ,

Can you provide me the link for donwloading RTMT ....

Thanks.,

[anchoudh · Accepted solution]

HI Mubarak,

To download RTMT from CUCM, please navigate to CUCM Admin->Applications->Plugins page->RTMT (for windows or Linux).

Hope it helps.

Anand

Pls rate helpful posts!!

[Mubarak ali Ali]

Thanks dear ,

I downloaded and i am able to monitor the calls .....

[anchoudh · Accepted solution]

Hi Mubarak,

Please refer the below link,

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080094ae2.shtml

Also please refer "Table 5-3     Audio Codec Preference Order for Cisco Unified Communications Manager 8.5(1)"

in the below link.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmsys/a02sycfg.html

Hope it helps.

Anand

Pls rate helpful posts !!