Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

barring calls on fxs card not working, pls take a look at my config

hello all

i have to set up call barring on an fxs card on a ccme sytem. The numbers it is allowed to dial are complicated so i decided to do it using translation rules. But a simple test fails to stop it dialling. To get an outside line on my system the users dial 0. Here is the basic config i used can someone see where i have gone wrong?

voice translation-rule 20

rule 1 reject /^0/

voice translation-profile callbarred1

translate calling 20

translate called 20

dial-peer voice 9899 pots

description security phone

translation-profile incoming callbarred1

translation-profile outgoing callbarred1

destination-pattern 9899

incoming called-number .

fax rate disable

port 0/0/3

regards colin

2 REPLIES
Anonymous
N/A

Re: barring calls on fxs card not working, pls take a look at my

New Member

Re: barring calls on fxs card not working, pls take a look at my

Thanks for the links, i realised i applied the rule to peer and it should have been the voice port.

thanks for your help

Colin

109
Views
0
Helpful
2
Replies