Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

VIP Super Bronze

Basic ACD on CME with a Wild Card Dial Peer

I am attempting to configure Basic ACD to service all incoming calls that are not matched against a registered ephone-dn or other lower preference dial peers. I have gotten the dial peer and application configured; however, I cannot figure out how to make it work with a wild card incoming called-number value. It appears that an explicit value is required on both the application param and incoming called-number command.

Has anyone done this before? If so, what am I missing?  The following configuration works if the user dials exactly 5550100; however, any other number does not match for obvious reasons. If I change the incoming called-number command to include a wildcard on dial-peer 2, the application fails and gives a reorder tone.

application

  service app-b-acd1 flash:bacd/app-b-acd-2.1.2.3.tcl

  param number-of-hunt-grps 1

  param queue-manager-debugs 0

  param queue-len 15

  param aa-hunt1 16085550100

  !

  service app-b-acd-aa1 flash:bacd/app-b-acd-aa-2.1.2.3.tcl

  paramspace english index 0

  param max-time-vm-retry 0

  param max-time-call-retry 600

  param voice-mail 0

  param aa-pilot 16085550100

  param number-of-hunt-grps 1

  paramspace english language en

  param handoff-string app-b-acd-aa1

  param call-retry-timer 15

  paramspace english location flash:bacd/

  param service-name app-b-acd1

  param drop-through-option 1

  param drop-through-prompt _bacd_welcome.au

  param second-greeting-time 45

  !

dial-peer voice 1 pots
corlist incoming pstn-inbound
description Inbound PSTN
translation-profile incoming PSTN_Trunk_Incoming
incoming called-number .
direct-inward-dial
port 0/1/0:23
dial-peer voice 2 pots
corlist incoming pstn-inbound
description Inbound PSTN
translation-profile incoming PSTN_Trunk_Incoming
preference 1
service app-b-acd-aa1
incoming called-number 5550100
direct-inward-dial
port 0/1/0:23
ephone-hunt 1 longest-idle
pilot 16085550100
list 1778, 1780, 1783, 1796, 5385, 5367, 1794, 1776
max-timeout 120
timeout 10, 10, 10, 10, 10, 10, 10, 10
description Main Number Hunt Group

Please remember to rate helpful responses and identify helpful or
Everyone's tags (4)
1 REPLY
Hall of Fame Super Gold

Re: Basic ACD on CME with a Wild Card Dial Peer

To do that, send all calls for such wildcard, with a translation-profile changing called number to "aa-pilot".

Session target, some local interface.

On the same DP, configure incoming-called number with said pilot number.

576
Views
0
Helpful
1
Replies