Configuration guide, command reference, network design reference manual, ad-hoc TAC guides and this forum itself. CME (and in general, IOS gear) use and fine configuration is far from secret. Just type freely in the search form on CCO and you will be overwhelmed by the information available.
Hey guys thanks for your replies... I appreciate the sample config - It's just that I'll need a step by step for configuring it, and I don't know why it's not 'easily' available. (believe me, I searched google and cisco for hours)
And to the second reply, I said I've already searched most of what I've known to be resourceful - no luck.
I probably should restate that I'm looking to configure the 7914 expansion card, not the phone itself - plus, I'm using Call Manager Express.
It should be really simple... and all I need is a little pdf from Cisco that explains it... nothing tough.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.