Most of the info such as user data, phone/line info, can be exported using BAT. BAT versions are different if you are moving from one cluster (v1) to another cluster (v2). In that case you will have to reformat the exported info into the new cluster's BAT format before importing them. Importing route patterns, translation patterns, partition, CSS etc are the hard part. There is no feature available in BAT to bulk import these.
With callmanager 5.x i have heard that 5.x architecture involves AXL, there are tools that are available which helps import route patterns, CSS, partitions etc. (and you can get this tool if you call TAC, this may be a rumour).
Thanks for your help. I manage to export users and phones in this past weekend, using BAT. For the import into another cluster I will take care probably sometime this week. I will let you know what problems I will encounter.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...