I am trying to use BAT to associate the end users with their phones, Phones are already BAT'd in and users are LDAP synched. SO I created a update users csv from the bat template and have the user ID, primary extension, and controlled device 1 field filled in.
when I run the job, I get this error for all users.
jfulgham WARNING : Controlled Device : 0021A02E793B does not exist. If all other values in the CSV are correct, then user will be inserted without this association.
So what is wierd is that the primary extension sets OK, but their is no controlled device on the user.
So is it best practice to go ahead and add the SEP to the mac/device name in BAT when building the initial insert file? We use a barcode scanner but I can use a simple find/replace to add SEP to the MAC, just let me know your thoughts.
I am still trying to develop my own best practice when doing installs.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...