Here is an example of a .csv for adding a Phone/User and a 7941 from a 4.x BAT
Don,Ferguson,dferguson,,,Enrollment Services,,,,001B0CAD4B23,B156-02 - Don Ferguson,,6000,Don Ferguson,,,,,,
I do think that Chris is onto something with his reference to the Lines portion of the setup. Make sure that the Template that you configured for these additions has the proper Line info (it's kind of a secondary step in the Add Template) Then when doing the actual BAT .xlt make sure to check the matching number of Lines checkbox before saving.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...