01-31-2014 12:10 PM - edited 03-16-2019 09:33 PM
Hey,
I notice that the BE6000s have the "Onboard SCU Storage Support" BIOS option is set to "Disabled" making it impossible to boot from the Flexflash SCU partition to run diagnostics before deployment. If I set this to "Enabled", run my diagnostics, and then set it back to "Disabled" am I breaking some special "BE Rule"? Or is it recommended that I download the latest version of the SCU ISO and boot using the KVM virtual media?
Thanks,
Joey
Solved! Go to Solution.
02-01-2014 03:10 AM
Always good to state on the latest FW and no you not breaking any it is good to make sure all is 100%
Sent from Cisco Technical Support iPhone App
02-01-2014 03:10 AM
Always good to state on the latest FW and no you not breaking any it is good to make sure all is 100%
Sent from Cisco Technical Support iPhone App
02-01-2014 05:46 AM
Excellent and Thank You!!!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: