BE6000 Boot from SCU Partition on Flexfalsh to run server diagnostics.
I notice that the BE6000s have the "Onboard SCU Storage Support" BIOS option is set to "Disabled" making it impossible to boot from the Flexflash SCU partition to run diagnostics before deployment. If I set this to "Enabled", run my diagnostics, and then set it back to "Disabled" am I breaking some special "BE Rule"? Or is it recommended that I download the latest version of the SCU ISO and boot using the KVM virtual media?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...