Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Best practice for hunt groups in cucm 6.1

Hi,

When we migrated from CCM 3.3 to 6.1 we discovered that our hunt groups had to be set up differently to get them to work.

We currently have a dummy phone set up which then forwards all calls to the pilot number which then distributes the calls through the huntgroup.

I'm sure this isn't the most effective way of doing things, so what's the best way to set these up?

Thanks

2 REPLIES
Cisco Employee

Re: Best practice for hunt groups in cucm 6.1

There is really no best practice, i usually configure things as simple as possible. Meaning if the calls come into a DID, configure the hunt pilot with that DID.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
Hall of Fame Super Red

Re: Best practice for hunt groups in cucm 6.1

Hi Lee,

If you don't want to use a "Dummy" phone, look at using a CTI-RP (Route Point) to Call Forward All to the Hunt Pilot DN :) This is an extremely common configuration.

Hope this helps!

Rob

169
Views
0
Helpful
2
Replies