Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Blank CME html page

I know this question has been posted before but I have not seen a solution.

When I launch http://x.x.x.x/ccme.html I get the login box. After I enter the credentials, I get a blank page.

I have put in ip http server and ip http path flash: in the configuration but still a blank page. Does anyone have a solution?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Blank CME html page

Hey there,

Add this command:

config t

file privilege 0 (hidden command)

exit

This is stated in the Readme that comes with CME package (8.8).

Thanks,

John

10 REPLIES
Community Member

Re: Blank CME html page

Hello bimckenz,

It very well could be that some files of the GUI are either missing or corrupted.

Could you please send your current configuration with a show ver, show telephony-service, if the configuration is fine we could have a look at and as a last resort

re-copy the files to the flash, during this process it is vital to not have any packet loss.

It is ideal that we make sure that you have also the proper version of the GUI, if you could tell me which tar file you downloaded maybe we can find to which CME version it corresponds to make sure that we have the proper GUI version.

Community Member

Re: Blank CME html page

Hello

I have the same problem. Do you know how fix it?

Regards

Community Member

Re: Blank CME html page

Look for a gui folder and point your http path to it.  I created a folder for all the telephony files called "phone" directly on flash:, so I had to enter "ip http path flash:phone/gui" to get it to work.  If you extracted your files directly to flash, I'm guessing it would look like this "ip http path flash:gui".  BTW, this is on a 2951 router running 15.0(1r)M1.

Blank CME html page

Hi all, As Scott said all you have to do is point to where your gui files are:

ip http path flash:/gui

Regards,

Jorge

Community Member

Re: Blank CME html page

Hi Bimckenz

check if you have the files for GUI and the follwing  commands


commands (global config)

ip http server
ip http authentication local
no ip http secure-server
ip http path flash:


files in the flash:

    admin_user.js
      admin_user.html
     CiscoLogo.gif
    Delete.gif
     dom.js
    downarrow.gif
     logohome.gif
   normal_user.html
    Plus.gif
    normal_user.js
    sxiconad.gif
    Tab.gif
    uparrow.gif


telephony-service
web admin system name XXXX password XXXX
dn-webedit
time-webedit

Blank CME html page

Hey there,

Add this command:

config t

file privilege 0 (hidden command)

exit

This is stated in the Readme that comes with CME package (8.8).

Thanks,

John

Community Member

adding the command  "file

adding the command  "file privilege 0" fixed that for me

Community Member

I have similar issue with

I have similar issue with C2911 router. After I added file privilege 0, I was not even able to login. I removed command and not I am not able login even. 

Community Member

I've got a 2801 with the same

I've got a 2801 with the same problem, but doesn't recognize the "file privilege 0" command.  I'm running 15.1(1)T code.

Community Member

Thanks,by adding file

Thanks,

by adding file privilege 0

it works....

3742
Views
24
Helpful
10
Replies
CreatePlease to create content