Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

BLF and Speed Dial on CCM5

Hello,

I'm searching the way to configure BLF and Speed Dial from the ccmuser with the CCMV5. Is it possible ? If yes, how can I do ?

Thanks for your help

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: BLF and Speed Dial on CCM5

Hi Gadacha,

BLF/Speeddials can only be configured by the Admin :(

Hope this helps!

Rob

4 REPLIES
Gold

Re: BLF and Speed Dial on CCM5

Yes, this is possible. Here is the link which gives details about how to configure it http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_0/sys_ad/5_0_4/ccmfeat/fsprsnc.htm#wp1109780

New Member

Re: BLF and Speed Dial on CCM5

Dear all,

under 5.0 (2000.1) was supported less 14 BLF on 7914, upgrade to 5.04(2130)which will solve it.

enable presence to allow (default restrict)

& change CCS to allow all.

New Member

Re: BLF and Speed Dial on CCM5

Thanks, but the question is:

Is it opssible for a user to configure their own speed dials and BLF from the ccmuser (not the ccmadmin) ?

Regards

Hall of Fame Super Red

Re: BLF and Speed Dial on CCM5

Hi Gadacha,

BLF/Speeddials can only be configured by the Admin :(

Hope this helps!

Rob

152
Views
0
Helpful
4
Replies
CreatePlease to create content