Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

BLF in 7962 and expansion module

                   Hi there,  I have setup 7962 with one expansion module for a branch office. all user's extension has been configured as SD in the Expansion module. it works fine. Now new receptionist ask for the BLF on the button of Expansion module, so when user is in a call,  she can see the light on and no need to forward call to them.  Please advice if there is any features available in CUCM 8.6 that I can use to achive those. 

Thanks

Roy

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: BLF in 7962 and expansion module

You should be able to configure BLF SD to achieve this.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmfeat/fsprsnc.html#wp1155652

Sent from Cisco Technical Support iPhone App

Please rate useful posts.
1 REPLY

Re: BLF in 7962 and expansion module

You should be able to configure BLF SD to achieve this.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmfeat/fsprsnc.html#wp1155652

Sent from Cisco Technical Support iPhone App

Please rate useful posts.
791
Views
0
Helpful
1
Replies
CreatePlease to create content