Each individual user that you want to monitor BLF on has to have the "Standard End User" and "Standard CTI Enabled" groups added to their profiles, and then the service for BLF monitoring has to be stopped and restarted in the Cisco Unified Attendant Console Admin. It was a little laggy at first, but it is working for me now
If you are still having problems, let me know, and I will double check what all I had configured.
Also don't forget that CUXAC does not have it's own directory configuration so it will be using what CM uses. This comes into play when pointing CM to LDAP using the Telephone Number Field instead of the IPPhone Field. When you do that, CUXAC can not tell the difference and will not show the BLF information of a 10 or 11 digit number. This is a flaw in their design if you ask me but they have no plans of fixing it...
ARC enterprise allows you to point the server to LDAP using the ipphone while CM uses Telephonenumber and everything works fine.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...